Spherical AISI 1019 Steel Powder

AISI 1019 Steel Spherical Powder, cold drawn Product Information -:- For detailed product information, please contact sales. -: AISI 1019 Steel Spherical Powder, cold drawn Synonyms -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: Spherical AISI 1019 Steel Powder characteristics -:- For detailed product information, please contact sales. -: Spherical AISI 1019 Steel Powder Particle Size -:- For detailed product information, please contact sales. -: -:- -:- 0-15μm ,5-25μm, 15-45μm, 15-53μm,20-63um, 45-75μm, 45-105μm, 45-150μm ,75-150μm. (Various granularities can be customized according to customer requirements) -:- For detailed product information, please contact sales. -:

Spherical AISI 1019 Steel Powder Applicable processes -:- For detailed product information, please contact sales. -: Laser/electron beam additive manufacturing (SLM/EBM, 3D printing) Direct laser deposition (DLD) Used in thermal spray (TSA) Powder hot isostatic pressing (HIP) Metal injection molding (MIM) Powder metallurgy (PM) Laser cladding (LC), etc. -:- For detailed product information, please contact sales. -: Spherical AISI 1019 Steel Powder Chemical Composition -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: AISI 1019 Steel, cold drawn Product Information -:- For detailed product information, please contact sales. -: **Product Data Sheet: AISI 1019 Steel, Cold Drawn, Round Bar** --- ### **1. Product Overview** AISI 1019 is a standard low-carbon steel grade known for its excellent combination of mild strength, good ductility, and superior formability. In its **Cold Drawn** condition, the hot-rolled bar is processed at room temperature through a series of dies to achieve precise dimensions, a smooth surface finish, and enhanced mechanical properties. This process makes AISI 1019 Cold Drawn steel an ideal and economical choice for a wide range of applications requiring consistent quality, tight tolerances, and excellent machinability for further fabrication. ### **2. Key Features & Benefits of Cold Drawing** * **Improved Surface Finish:** Produces a smooth, scale-free surface superior to hot-rolled stock, often suitable for applications without additional finishing. * **Enhanced Mechanical Properties:** The cold working (strain hardening) process increases tensile strength, yield strength, and hardness compared to hot-rolled or annealed conditions. * **Tight Dimensional Tolerances:** Achieves precise and uniform diameters, reducing machining time and material waste. * **Excellent Machinability:** The uniform microstructure and consistent hardness provide predictable, free-machining characteristics. * **Good Weldability and Formability:** Maintains the inherent weldability and ductility of low-carbon steel, allowing for further fabrication. ### **3. Standard Chemical Composition (Weight %)** | Element | AISI 1019 Specification | Typical Analysis | | :----------- | :---------------------- | :--------------- | | **Carbon (C)** | 0.15 - 0.20 | 0.18 | | **Manganese (Mn)** | 0.70 - 1.00 | 0.85 | | **Phosphorus (P)** | ≤ 0.040 | 0.010 | | **Sulfur (S)** | ≤ 0.050 | 0.025 | | **Iron (Fe)** | Balance | Balance | *Note: The higher manganese range compared to AISI 1018 contributes to slightly better hardenability and strength.* ### **4. Typical Mechanical Properties (Cold Drawn Condition)** *Properties are representative and can vary based on the degree of cold work (drawing reduction).* | Property | Metric Value | Imperial Value | | :------------------------------ | :------------------- | :------------------- | | **Tensile Strength** | 470 - 580 MPa | 68,000 - 84,000 psi | | **Yield Strength (0.2% Offset)**| 390 - 520 MPa | 57,000 - 75,000 psi | | **Elongation in 50 mm (2 in)** | 10% - 18% | 10% - 18% | | **Hardness** | 75 - 90 HRB | 75 - 90 HRB | | **Modulus of Elasticity** | 190 - 210 GPa | 27,500 - 30,500 ksi | | **Machinability (Relative)** | **Very Good (~72%)** | (AISI 1212 = 100%) | ### **5. Physical Properties** | Property | Value | | :---------------- | :------------------------ | | **Density** | 7.87 g/cm³ (0.284 lb/in³) | | **Melting Point** | ~1520°C (2768°F) | ### **6. Primary Applications** AISI 1019 Cold Drawn steel is versatile and used extensively for parts requiring a good balance of strength and formability, including: * **Automotive Components:** Non-critical brackets, clips, linkage parts, pins, and bolts. * **General Machinery:** Shafts, spindles, rods, and axles for light to moderate duty. * **Construction & Hardware:** Fasteners, hinges, and various structural components. * **Appliance Manufacturing:** Internal frames, supports, and brackets. * **Fixtures & Tooling:** Jigs, dowel pins, and guides where precise dimensions are needed. * **Further Fabricated Parts:** An excellent starting material for parts that will be machined, turned, or ground to final specifications. ### **7. Conforming International Standards** This product is equivalent to or meets the requirements of the following standards: * **AISI (USA):** AISI 1019 * **ASTM (USA):** **ASTM A108** (Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished) * **SAE (USA):** SAE J403, SAE J412 (Chemical Compositions) * **UNS (USA):** UNS G10190 * **DIN (Germany):** 1.0406 / C18 (Close equivalent) * **ISO (International):** ISO 683-18 (Designation for similar non-alloy steel) * **JIS (Japan):** JIS S20C (Similar grade) ### **8. Fabrication Notes** * **Machining:** Machines easily. Use standard tooling and speeds for low-carbon steel. * **Welding:** Exhibits good weldability by all common methods (SMAW, GMAW, GTAW). For highly stressed components or thicker sections, standard preheating/cooling practices are recommended. * **Heat Treatment:** Can be carburized to create a hard, wear-resistant surface while maintaining a tough core. It is not typically through-hardened due to its low carbon content. * **Stress Relieving:** If required for critical applications to prevent distortion after heavy machining, a stress relief anneal at 590-650°C (1100-1200°F) is recommended. ### **9. Availability** * **Form:** Primarily supplied as straight-length round bars. Other shapes (hex, square) may be available. * **Common Sizes:** Available in a wide range of diameters, typically from 5mm (0.25") up to 100mm (4") and larger, depending on the supplier. * **Condition:** Cold Drawn (CD), also known as Cold Finished (CF). --- **Disclaimer:** The information provided is for reference purposes. Specific properties can vary based on manufacturer, processing parameters, and final bar diameter. Users should validate the material's suitability for their specific application and conduct necessary testing. For stress-relieved or other special conditions, please refer to specific product data sheets. -:- For detailed product information, please contact sales. -: AISI 1019 Steel, cold drawn Specification Dimensions Size： Diameter 20-1000 mm Length <5441 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: AISI 1019 Steel, cold drawn Properties -:- For detailed product information, please contact sales. -:

Spherical AISI 1019 Steel Powder Particle Size Description -:- For detailed product information, please contact sales. -: Applications of Spherical AISI 1019 Steel Powder -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: Applications of AISI 1019 Steel Spherical Powder, cold drawn -:- For detailed product information, please contact sales. -: Chemical Identifiers AISI 1019 Steel Spherical Powder, cold drawn -:- For detailed product information, please contact sales. -:

Packing of AISI 1019 Steel Spherical Powder, cold drawn -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Spherical Powder drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1912 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition