Spherical EN S235JR High Manganese, Base Steel Powder

EN S235JR High Manganese, Structural, Hot Rolled, Base Steel Spherical Powder, t < 16 mm Product Information -:- For detailed product information, please contact sales. -: EN S235JR High Manganese, Structural, Hot Rolled, Base Steel Spherical Powder, t < 16 mm Synonyms -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: Spherical EN S235JR High Manganese, Base Steel Powder characteristics -:- For detailed product information, please contact sales. -: Spherical EN S235JR High Manganese, Base Steel Powder Particle Size -:- For detailed product information, please contact sales. -: -:- -:- 0-15μm ,5-25μm, 15-45μm, 15-53μm,20-63um, 45-75μm, 45-105μm, 45-150μm ,75-150μm. (Various granularities can be customized according to customer requirements) -:- For detailed product information, please contact sales. -:

Spherical EN S235JR High Manganese, Base Steel Powder Applicable processes -:- For detailed product information, please contact sales. -: Laser/electron beam additive manufacturing (SLM/EBM, 3D printing) Direct laser deposition (DLD) Used in thermal spray (TSA) Powder hot isostatic pressing (HIP) Metal injection molding (MIM) Powder metallurgy (PM) Laser cladding (LC), etc. -:- For detailed product information, please contact sales. -: Spherical EN S235JR High Manganese, Base Steel Powder Chemical Composition -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: EN S235JR High Manganese, Structural, Hot Rolled, Base Steel, t < 16 mm Product Information -:- For detailed product information, please contact sales. -: **Product Name:** EN S235JR Structural Steel, Hot Rolled, Base Material, Thickness t ≤ 16 mm **Overview:** EN S235JR is the **most fundamental and widely used non-alloy structural steel** in Europe, defined as a **base material** under the EN 10025-2 standard. The "JR" designation indicates the baseline quality level, with impact properties verified at room temperature (+20°C). It is supplied in the hot-rolled condition and is characterized by excellent weldability, good formability, and high cost-effectiveness. For thicknesses **≤ 16 mm**, it achieves its highest guaranteed yield strength. It is critical to note that **S235JR is NOT a "High Manganese" steel**; it is a standard carbon-manganese steel with typical manganese levels. **Key International Standards:** * **Primary Standard:** **EN 10025-2:2019** - Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels. * **Grade & Quality Designation:** **S235JR** * **S:** Structural Steel * **235:** Minimum yield strength (ReH) in MPa for thicknesses **≤ 16 mm**. * **JR:** Basic quality. **'J'** = Impact tested; **'R'** = Test temperature is **Room Temperature (+20°C)**. * **Clarification on "High Manganese":** This is a **misleading and incorrect classification**. S235JR has a standard manganese content for its class and is not chemically distinguished by high manganese. Its key attribute is its status as the **economical base grade**. * **Common International Equivalents:** * **ASTM:** **A36** (closest general-purpose equivalent). * **JIS:** **SS400**. * **GB/T:** **Q235B**. * **ISO:** **Fe360B** as per ISO 630-2. **Chemical Composition (Ladle Analysis, % by weight, maximum values per EN 10025-2 for t ≤ 16 mm):** Standard composition for maximum manufacturability. * **Carbon (C):** ≤ **0.17%** * **Manganese (Mn):** ≤ **1.40%** (This is a standard upper limit, not a high level. Content is typically lower for thin sheets to aid formability). * **Phosphorus (P):** ≤ **0.045%** * **Sulphur (S):** ≤ **0.045%** * **Nitrogen (N):** ≤ **0.014%** (for killed steel, may be higher for rimming steel in thin sheets). * **Note:** For thin hot-rolled sheet (t < 3mm), it may be supplied as "rimming steel," which has lower silicon content and different solidification characteristics. **Physical & Mechanical Properties (for hot-rolled condition, thickness t ≤ 16 mm):** This is the optimal thickness range for achieving the full nominal strength. * **Yield Strength (ReH):** ≥ **235 MPa** (This is the **highest guaranteed minimum** for this grade, applicable only to t ≤ 16mm). * **Tensile Strength (Rm):** **360 - 510 MPa**. * **Elongation at Break (A5):** ≥ **26%** (Minimum, longitudinal test piece. Demonstrates excellent ductility). * **Impact Energy (KV):** ≥ **27 J at +20°C** (Longitudinal, Charpy V-notch). **CRITICAL LIMITATION:** No guaranteed toughness below +20°C. * **Density:** **7.85 g/cm³**. * **Modulus of Elasticity:** **210 GPa**. * **Poisson's Ratio:** **0.3**. **Product Features:** 1. **Optimal Strength in Thin Sections:** Delivers its full nominal yield strength (235 MPa) in this thickness range, offering the best weight-to-strength ratio for this grade. 2. **Exceptional Weldability and Formability:** The low carbon content and thin gauge make it extremely easy to weld (no pre-heat typically required) and cold form (bend, roll, stamp). 3. **Maximum Cost Efficiency:** The most economical entry point for structural steel components, offering proven performance for a vast array of non-critical applications. 4. **Availability:** The most readily available steel grade in a wide variety of forms (sheet, strip, sections). **Typical Applications (for t ≤ 16 mm):** S235JR in thin sections is ubiquitous in light construction and general manufacturing. * **Light Construction:** **Purlins, girts, cladding rails, and light framing sections** (often cold-formed from hot-rolled coil). * **General Fabrication:** **Machine guards, cabinets, covers, brackets, and platforms**. * **Automotive & Transport:** **Non-critical trailer body panels, internal reinforcements, and container sheathing**. * **Storage & Furniture:** **Shelving units, racking components, and industrial furniture**. * **Ductwork & Enclosures:** **Ventilation ducts, cable trays, and electrical enclosures**. **Available Forms & Processing (for t ≤ 16 mm):** * **Forms:** **Hot-rolled sheet and strip** (in coils or cut lengths), **flat bars**, and **light structural sections** (angles, channels). * **Surface:** Typically with mill scale. Commonly available as **pickled and oiled (PO)** for painting or further processing. * **Processing:** Ideal for **shearing, punching, laser/plasma cutting, roll-forming, and all types of welding**. --- **Critical Selection & Procurement Note:** * **Temperature Warning:** The **JR quality is unsuitable for any application where the service temperature can fall below 0°C**, especially if dynamic loads or impact are involved. For such uses, **S235J0 (0°C) or S235J2 (-20°C)** must be specified. * **Thickness-Strength Relationship:** This is the reference thickness for the 235 MPa yield strength. For thicker material, the guaranteed yield strength decreases (e.g., ≥225 MPa for t > 40mm). * **Correct Terminology:** Avoid using the term "High Manganese." The correct description is **"Non-Alloy Base Structural Steel."** * **Specification:** For thin sheet, it is advisable to specify if **killed or rimming steel** is required based on the forming and welding process. For most fabrication, killed steel is preferred. -:- For detailed product information, please contact sales. -: EN S235JR High Manganese, Structural, Hot Rolled, Base Steel, t < 16 mm Specification Dimensions Size： Diameter 20-1000 mm Length <5812 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: EN S235JR High Manganese, Structural, Hot Rolled, Base Steel, t < 16 mm Properties -:- For detailed product information, please contact sales. -:

Spherical EN S235JR High Manganese, Base Steel Powder Particle Size Description -:- For detailed product information, please contact sales. -: Applications of Spherical EN S235JR High Manganese, Base Steel Powder -:- For detailed product information, please contact sales. -: -:- For detailed product information, please contact sales. -: Applications of EN S235JR High Manganese, Structural, Hot Rolled, Base Steel Spherical Powder, t < 16 mm -:- For detailed product information, please contact sales. -: Chemical Identifiers EN S235JR High Manganese, Structural, Hot Rolled, Base Steel Spherical Powder, t < 16 mm -:- For detailed product information, please contact sales. -:

Packing of EN S235JR High Manganese, Structural, Hot Rolled, Base Steel Spherical Powder, t < 16 mm -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Spherical Powder drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2283 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition